HNG Hook Stapler
Hang casements for spray finishing in seconds. No drilling. No screw hooks. No fuss.
Why Choose the Copenstick HNG Hook Stapler?
Why Choose the HNG?
Hanging casements for spray finishing has always meant drilling pilot holes for screwing in hooks — a slow, repetitive task that adds up across a full production run. The HNG eliminates that process entirely.
Our purpose-designed stapler places temporary 16g wide crown staples directly into the casement face with a single trigger pull. No pilot hole required. When painting is complete, the staples come out cleanly with only minimal touch-up needed. It is a straightforward change to your finishing line that saves considerable time every day.
One tool. Faster finishing. Less re-work.
No Drilling Required Place the stapler against the face to be hung and pull the trigger. The 16g wide crown staple seats instantly, ready to carry the casement on the finishing line.
Clean Removal, Minimal Touch-Up Staples pull out after painting with only a small 16g hole remaining, cutting re-work time significantly compared with screw hooks or drilled fixings.
Pneumatic Operation Connected to a standard 6 bar compressed air supply, the HNG is quick to set up and straightforward to use across a production shift.
Lightweight and Manoeuvrable At 1.5 kg, the tool is easy to handle throughout the working day without operator fatigue.
Ideal for: spray finishing lines for timber casements and sash windows • paint shops handling pre-glazed or pre-assembled frames • joinery workshops finishing batches of casements
How it works
Connect Air Supply Attach to your 6 bar compressed air line.
Position the Stapler Place the nose against the casement face where the hanging point is required.
Pull the Trigger A single 38 x 11 mm wide crown staple is driven flush, creating a secure hanging point.
Hang and Finish Suspend the casement on your finishing line and complete the spray process.
Remove and Make Good Pull the staples out once painting is complete. Minimal touch-up required.
Key Specifications
| Parameter | Value |
|---|---|
| Pneumatic supply | 6 bar |
| Compatible staple size | 38 × 11 mm – 16g Wide Crown Staples |
| Maximum assembly weight | 7.5 kg |
| Tool weight | 1.5 kg |
Typical lead‑time from order to dispatch is 5-7 weeks
Shipping details: Total package weight 2.2kg
Made in Britain, Installed Worldwide
100+ Machines | 14+ Countries | Innumerable hours saved to date
From our workshop in West Sussex, we mill and assemble every spindle and run every acceptance test before a machine leaves the door. Each unit ships with the correct voltage, CE paperwork and a plug‑and‑play starter tooling pack—so customers from Melbourne to San Francisco can uncrate and start cutting right away.
Frequently Asked Questions (FAQs)
-
No. The HNG is designed specifically to eliminate pilot drilling. Place, trigger, and the staple seats cleanly into the timber face without any pre-drilling.
-
The HNG uses 38 x 11 mm 16g wide crown staples, available from standard fixings suppliers.
-
The HNG is rated to support assemblies up to 7.5 kg per hanging point, suitable for the majority of standard timber casements.
-
Only the small 16g staple hole requires making good, which is significantly less re-work than the holes left by screw hooks or drilled fixings.
-
A standard 6 bar compressed air supply is all that is required. The HNG connects to any workshop airline with a compatible fitting.
Save Hours. Boost Profit.
Cut cycle times by up to 240 %, lower cost‑per‑sash, and ship more orders every shift—without expanding your floor space.
Made in Britain. Delivered worldwide.